| Anti-Travel Viscocity
Booster & Bleed Control
50ml $8.85
|
Anti-Travel is used for tasks that require thick paint such as
screenprinting, lino or block-printing . Use it on difficult synthetic fabrics such as acetate, nylon or polyester. Anti-Travel is very concentrated. Use 1 drop for every 1t or 5ml of paint |
Opaque Mask Medium
|
The Opaque
Medium creates a base for translucent paint so it will stand out and
seem more opaque on a dark background. Apply a coat of medium and let
dry. Apply your translucent paint as the top coat. If you are using
the Stewart Gill paints, you can heatfix all layers of product
together. For other paints you will need to heatfix each layer
separately. There is no need to heat fix paper.
To perform this task in one step, add pigment directly to the Opaque Medium to create your own opaque colors. Heatfix if you are using fabric. (b/o) 50ml $7.10 |
|
| Beadhesive Textile Glitter & Gem
Glue
|
Heatfix for excellent wash-ability for
fabrics 50ml $7.10
|
Extender Medium
|
Extender medium increases the 'runnability' of a paint and gives it a
more fluid feel. It is much the same as glaze except that it is a
fabric medium. To thin even more just add water. Use it as a medium for adding mica pearl, and metallic powders to paper a nd cards. Use it as a 'sizing' medium to conserve paint when painting on very porous fabrics. Apply the medium & dry. Apply your paint or dry product such as mica powder. 200ml $21.00 |
|
| Filigree Fluid
|
Apply directly to fabric or paper
using the applicator nozzle or apply to stamps and stamp on paper or
fabric and let air dry. Heat with a heat gun to create a raised texture
effect. For a more puffy result, heat the fluid with a heat gun while
it's still wet.
Filigree Fluid is less resistant to picking off of textiles and is slower drying than other similar products. Paint a puffed pattern with paint. Sprinkle with embossing powder and heat. 50 ml $7.10 (back ordered) |
|||
